CAMBER GAUGE TOOL
Camber Gauge Castor Strut Wheel Alignment Adjustable Gauge Tool Camber Gauge Castor Strut Wheel Alignment for Car Truck
Size: approx. 12.7 x 5cm/ 5"" x 1.97"" (L*D)
Measure the Camber and Caster angle on the wheel hub or brake disc
Suitable for accurate checking of the castor and camber angle
Has a simple leveling adjustment from -5 degrees to 5 degrees
Gauge attaches to the hub or disc brake
Allows adjustment to maintain correct wheel alignment and even tyre wear
Allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing
How to use:
1. Remove the four-wheel positioning sensor (clamp) and remove the tire;
2. Carefully suck the level on the side of the brake wheel;
3. Adjust the level to zero;
4. Install the required positioning special parts;
5. Use special tools to adjust the positioning of the parts to the desired measurement angle with the help of the level indicator.
6. If you find a slight deviation with the locator, you only need to fine-tune it at the bottom of the car. (Generally, a small deviation will not cause a positioning fault)